#18390 – MIP X-Duty, Rear CVD Kit, Traxxas Bandit, Fiesta ST Rally

#18390 - MIP X-Duty, Rear CVD Kit, Traxxas Bandit, Fiesta ST RallyCompatibility:Traxxas Bandit

• For ultimate efficiency use with ball bearing Traxxas Rear Hubs. (TRA3752, TRA5116)
• Strong 12mm Keyed Hex Standard (Must use 12mm wheels not compatible with pin)
• When hubs are in the lowest position, clearance on the arm may be necessary for the X-Duty Bell to rotate freely. Best to use a sanding drum to clearance the plastic arm. (check out photo with wrench pointing to area)
• Front Traxxas 12mm Hex Conversion : 1 x TRA1654
• Upgrade Hubs and Bearings recommended : TRA3752 , TRA5116

Traxxas Fiesta ST Rally

• Direct Fit, No Modification Needed.
• Front CVD Kit:#19390

Advantages:

• Strong splined X-Duty steel construction.
• Fully rebuildable so any damaged or worn part can be replaced. (scroll down on main part # and all rebuild components are there)
• Ultimate upgrade for those that are drag racing!
• No more ripped and twisted drivetrain.

Pro Tips:

• Use MIP Grease and Loctite upon assembly.
• Be sure to keep joints lubed to enjoy long part life

Features:

• Heat Treated steel components to help increase strength and part life.
• Black Oxide coated to protect the components from premature rust.
• 100% Designed / Manufactured / Packaged in the USA!!!

Includes:

• Complete Rear X-Duty Drivetrain