Class One Model Works LM00407 EMD GP40-2 1A3 Rebuild BNSF 3025 - DCC & Sound

This Class One Model Works release captures the modernized 1A3 rebuild program applied to classic second-generation EMD power for continued high-mileage freight service. The prototype reflects the rail industrys practical approach to extending locomotive lifeupgrading original GP40-2 platforms with refreshed mechanical systems, electronics, and reliability enhancements while retaining the core EMD heritage that made the design a long-time backbone of North American railroading.

FEATURES:

• Fully Assembled
• Multiple Road Numbers
• Countless Factory Applied Detail Parts, Such As Grab Irons, Steps, Lifting Rings, Air Hoses, Windshield Wipers, Etc.
• Precise And Quiet Slow Speed Control
• Kadee 5 Compatible Metal Couplers
• 5-Pole Skew Wound Motor
• Dual Flywheels
• CNC Machined Wheelsets With RP-25 Contour
• All Wheel Drive
• All Wheel Electrical Pickup
• Directional LED Headlights
• Quality Packaging Safely Stores Model
• 18 Inch Minimum Radius
• DCC Sound Equipped Models Also Feature:
  • All Fans On Your Model Function Prototypically With Micro-Processor Controlled Tru-Fans
  • Onboard DCC Decoder With SoundTraxx Tsunami2 Sound
  • Onboard CurrentKeepers
• GP40 General Features:
  • Detailed And Painted Cab Interior, Complete With Separate Front Wall, Floor, Back Wall, Control Stand, And Seating
  • Sliding Cab Windows
  • New: Cab Interior Sunshades
  • Highly Detailed Blomberg Trucks Complete With Traction Motor Detail
  • Three (3) Detailed 9 Blade Radiator Fans
  • Highly Detailed Underframe Piping, Plumbing, Cabling, And Salem Air Filters
  • Prototypical Arrangement Of Sand Lines, Which Flex With Truck Movement
  • Metal Handrails And Plastic Stanchions
• BNSF Road Specific Features:
  • Era: Mid-2010s To Present
  • Accurate BNSF Heritage 4 Paint Scheme
  • LED-Illuminated Headlights
  • LED-Illuminated Number Boards
  • LED-Illuminated Step Lights
  • LED-Illuminated Walkway Lights
  • LED-Illuminated Truck Lights
  • LED-Illuminated Ditch Lights
  • Dynamic Brake Blister (Early Short Forward Taper) With 10-Blade Fan And Dynamic Brake Vent
  • Nathan K3LA 3-Chime Airhorn On A Stand On Dynamic Brake Blister
  • Frame Mounted Electronic Bell
  • Standard EMD Cab Sunshades
  • Prototypically Appropriate Arrangement Of Rear View Mirrors And Wind Deflectors On Cab Sides
  • Lift-Out Smooth Cab Base Doors
  • Modified Raised Cab Doors
  • Straight Nose Grab Irons
  • 81 Inch Low Short Hood With Electric Handbrake
  • Nose Toilet Vent
  • Blanking Plates Over Nose And Cab Louvers
  • EMD Medium Snowplow With Grab Irons On Front Pilot Plate, Spare Knuckle Holders On Rear Pilot Plate
  • Cut Levers With Extended Handles
  • Pilot Plates As Modified By BNSF
  • 3-Hose MU Hose Clusters With Silver Gladhands
  • Modified Short MU Stand With Integrated Ditch Lights, Plus Two Dummy MU Connections
  • Pivoting Front And Rear Drop Steps
  • 3600 Gallon Fuel Tank With Buckeye Fuel Fillers, Single Vertical Fuel Gauges, And A Round Fuel Gauge On The Engineers Side Only
  • Chicken Wire Radiator Intake Grills With Etched Diamond Pattern Mesh Screens
  • Etched Open Fan Grills
  • Large Square ECAFB Box
  • Speed Recorder On First Axle On The Firemans Side
  • AEI Tags
  • Early Smooth Blower Duct
  • 4 Tall Jack Pads, 2 Per Side
• BNSF 3025 Specific Features:
  • Open Firemans Side Hood Door With Interior Details
  • Rear Number Boards Removed As Per Prototype
  • High Clearance Pilot Step Wells
  • GP40-2 Lettering
  • LED-Illuminated High, Cab Mounted Headlight
  • LED-Illuminated Strobe Light
  • Waste Oil Retention Tank
  • Modernized Inertial Air Intake Screens
  • RV Air Conditioners
  • Whip Antenna On Ground Plane
  • GPS Dome On Ground Plane
  • ETD Antenna On Ground Plane
  • Sinclair Mounted On Ground Plane
  • Air Dryer, Next To Engineers Side Rear Stepwell
  • Three Speed Recorders: Engineers Side First Axle and On Firemans Side First and Third Axles